hasja.blogg.se - Xexmenu 1.2 corrupted fix

#Xexmenu 1.2 corrupted fix update
#Xexmenu 1.2 corrupted fix software
#Xexmenu 1.2 corrupted fix professional

Did the ring of light on the power button cycle like it always does when it turns on but nothing came on the screen? Your GPU may need a professional reflow/xclamp fix(wnyconsoleservices on skype is a good repairman).Make sure you have a video cable plugged in and your TV on the right input!.If your console is an RGH, check for a pulse light (a small led will blink roughly every 5 seconds inside the back of the console on top of the AV port in phats or under the DVD drive in slims) if this is blinking this is good it is still trying to boot! If it has been a half hour and still it hasn't booted but light is blinking try removing the hard drive (maybe corrupt files).This applies to when XeX Menu won't start also

Recently installed something and this is happening? Uninstall it, most likely need to try a re-transfer or your putting it somewhere its not supposed to be.

#Xexmenu 1.2 corrupted fix update

You are most likely on a non-matching title update for which these mods where made for.

Pixelated/Checkerboard screens are another form of GPU failure it needs the old thermalpaste/heatsink/reflow/reball fix(wnyconsoleservices on skype is a good repairman).

If using mods you might be on wrong title update or your not using them at the right time or they don't work in general.

If it is freezing after not too much use (less than an hour or two) then shutoff let it cooldown and next time you boot up let it run on xex menu looking at your temperatures, check back every now and then until it freezes, remember the temperatures it says on the screen (maybe take a pic), repeat the process, if the issue re-occurs see about changing your fan speeds/heatsink tightening/professional reflow/thermal paste replacement (wnyconsoleservices on skype is a good repairman).

Unplug the hard drive and try to boot, if this works then remove whatever was recently added/changed.

Make sure your Xbox logo is pulsing, if it is that means it's loading (plugins can cause this).

If you recently flashed the console recently obviously you need to reflash.

If it's RGH1 the pll_bypass (green CR wire) may need re-soldered.

#Xexmenu 1.2 corrupted fix software

I ran a JTAG/RGH/Flashing and Repair Service for over a year and serviced over 80 consoles, so these solutions are all based on what I learned from consoles I've had to fix and I have given tech support forįOR ALL PROBLEMS YOU SHOULD THINK OF WHAT YOU DID LAST TIME IT WAS WORKING, TRY UNDOING THIS/REMOVING HDD, THIS WILL FIX MOST SOFTWARE ISSUES! A lot of the time I see threads of some really common issues with the same solutions and I was hoping that this would clean up this support forum for those with the out of the norm issues.